Power Steering Hose replacement?

[InfernoM3]

is this the correct hose to buy? And how do I detach old and attach new to the pump? thanks

[InfernoM3]

is this the correct hose to buy? And how do I detach old and attach new to the pump? thanks

bump

[Guapo]

is this the correct hose to buy? And how do I detach old and attach new to the pump? thanks

That looks like the one Autohausaz has listed for the reservoir to the pump for the 535. As for install, it looks like the open end simply attaches to the bottom of the reservoir, and the other end is a simple banjo fitting. There is a bolt that has holes in it that goes through the large hole on the end of the fitting. It SHOULD come with new crush washers that go on either side of the fitting. Really couldn't be simpler.

[Guapo]

One thing to note, before this thread falls into obscurity where it should be:

There's a few supercessions on the part numbers. If you have a loopdeloop pump to box line and get a uh...more...linear one from BMA or a dealer, it'll still fit but you'll be confused and feel bad about it until you actually stick it on the car.

Pretty easy process. Use new crush washers. Fill with the correct fluid, bleed, drive.

best, whit

Indeed, I just experienced that this week. All is well so far.