Reply With Quotei think you need to pull the transmission computer in the E-box
Grand Master
Urgent: how do I disable the "trans program" error after a 5-speed conversion
Title says it all. How do I extinguish the "trans program" warning on the OBC after swapping out the auto tranny for a 5-speed?
Your answers ASAP, please.
Last edited by Jay 535i; 06-03-2006 at 04:29 PM.
.
Jay Lebo - Toronto, Canada
1990 BMW 535i
5-speed conversion
Lightened flywheel
Sachs Suspension Kit
E.A.T. Chip
Grand Master
i think you need to pull the transmission computer in the E-box
5-10 Grand Master
you need to ground the wire that goes to the check control module from the tranny computer, it should be on the diagram for ccm or the tranny computer i don't have my info here at home for the wire color but a diagram will show it
all america wants is cold beer warm cat and a place to take a poop with a door on it
Major Contributor
Unplug the connector to the TCU which is behind the right front passenger footwell speaker. The trim panel & speaker come out easily. The TCU is tucked up in the opening, you might have to remove the glovebox on an e34 to have enough room to get to it.
The pin numbers are molded into the TCU. Correlate which pin is #33 on the wire socket. Solder a 12" or so length of wire to a shaved down spade lug and stick it into the pin #33 socket and tape it in place. Attach the other end of the wire to any convenient ground. I ended up scraping some paint off near the speaker and drilled it for a self-tapping screw with some No-Lox to keep it from ever corroding and it got rid of the "trans program" message instantly.
If you follow the wiring diagram, I think it is a grey-brown wire, and it goes to pin #5 in the main fuse box for the CCM. Not sure how to locate it there, never bothered looking for it at that end.
gale
92 735i 5-spd, turbo project finally underway!
Super Moderator
Do you have EML or not?
In case of EML read this
http://www.bimmerboard.com/forums/posts/202044/
@Gale: Michael Oswald got the info for his conversion from me yesterday. I asked Reinhard in Germany, maybe he (Mike) can send you a copy of the email exchange.
5-10 Grand Master
did you see the extra pictures of the e36 abs crap i posted, maybe helpful wherever you posted it to http://www.bimmer.info/forum/showthread.php?t=22142
Originally Posted by shogun
all america wants is cold beer warm cat and a place to take a poop with a door on it
Super Moderator
Yes Sir, of course I did and I translated it into German too.
But in Germany I was told the part cannot be repaired/opened, otherwise the road certificate will expire. German TUV does not allow to repair this part for safety reasons.
Here we go, English on Bimmerboard and German translation.
http://www.bimmerboard.com/forums/posts/203293
Your humble servant
Last edited by shogun; 06-04-2006 at 01:01 AM.
5-10 Grand Master
eh what they don't know won't hurt them
all america wants is cold beer warm cat and a place to take a poop with a door on it
Posting Permissions
