Reply With Quoterespond, and or check up behind the bumper where the wire for the sensor meets up with the foglight wires, sometimes you'll find a problem there.
Originally Posted by fsteyer
ac condenser replacement, temp sensor problem
Hi -
I just finished replacing my condenser. It wasn't difficult, just needed to remove the bumper and front grill, loosen the radiator and it slips right out.
After I reconnected the temp sensor on the bumper my computer readout is stuck on +20F. Any suggestions are appreciated.
Thanks
Super Moderator
Give it a day or so , sometimes the temp sensor takes some time to
respond, and or check up behind the bumper where the wire for the sensor meets up with the foglight wires, sometimes you'll find a problem there.
Green Beret Special Ops
if it doesnt clear up after that you might need to clean up the connections and use some sontact cleaner.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
5-10 Grand Master
it's strange how some cars come right up when you plug in a sensor and others take a while to get up to speed
all america wants is cold beer warm cat and a place to take a poop with a door on it
thanks ... I'll just give it some time then.
btw ... the previous two avitars are perfect in sequence .....
Last edited by fsteyer; 05-19-2006 at 08:49 AM.
Posting Permissions