could be... run a search on dog-bones...
I was bleeding my brakes this weekend and found this.
Is there any special trick to changing these?
Anything going to unload on me?
Anything that requires special tools?
Anything I should change out while I am there?
Suggestions are much appreciated.
Ryan
1994 525iT
could be... run a search on dog-bones...
If it cannot be fixed by the dremel or ducktape.. get out the sledge...
--------------------------------------------------------------------
I miss my e34
i have the same problem
rear suspension
bilstin HDs, eiback prokit, K&N instert, DEPO fogs, sound system, zimmerman rotors, metal master
Mine look the same. No idea how to change them yet, but I ordered a set of 'bones and waiting for them to come.
From where did you order them?Originally Posted by Qube
Ryan
1994 525iT
BMA has them...Originally Posted by rps1072
If it cannot be fixed by the dremel or ducktape.. get out the sledge...
--------------------------------------------------------------------
I miss my e34
thats about the simplest thing I replaced yet, takes like 5 minutes a side.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
What could we expect as improvement after a replacement of those dogones ? What exactly is the purpose of those ? What is a symptom of defective dogbones ?Originally Posted by 632 Regal
they may or may not firm up the rear suspensions movements side to side depending on how worn out they are, they all look like ass
all america wants is cold beer warm cat and a place to take a poop with a door on it
Just do it - easy and not too expensive. Do a search of the forum for "pitman" or "dog bones" and that should get you the step by step instructions.