GO FISHING, use SLABSAUCE Fishing Attractant
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: WTB Eibach springs

  1. #1
    Join Date
    Jan 2006
    Posts
    370

    Default WTB Eibach springs

    Just wondering if anyone has a set of Eibachs they may want to sell. I'm currently using BAV springs, with Bils, and sits too low in rear. Also suggestions on any other springs would be great. Thanks Derek.

  2. #2
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    i dont remember the rear being too low but looking back the rear camber was way off. Either the Eibachs or H&R are good springs in your car, find out the part number, google it and get the best price, then call www.bmaparts.co they will match the price and anything over 50 bux is free shipping.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  3. #3
    Join Date
    Jan 2006
    Posts
    370

    Default

    Thanks Jeff, You and I spoke about the Bav's making the rear camber out of wack. You switched to Eibachs didn't you?

  4. #4
    Join Date
    Feb 2004
    Posts
    4,894

    Default

    I have Eibach and I don't have any abnormal tire wear... all equal across the tread regardless of tire sizes.

  5. #5
    Join Date
    Mar 2006
    Location
    CT
    Posts
    51

    Default Speaking of Eibach springs....

    Would they cause the car to bottom out if installed without low profile tires (stock tires are on car)?

  6. #6
    Join Date
    Jan 2006
    Posts
    370

    Default

    I had to remove the factory bumpstops from the car in the rear. Im running bav springs. Need to get rid of them, tearing up rear tires. Running a low profile tire will not make you bottom out. However the size of the tire will create a problem of rubbing the fender well. My problem is my rear camber.

  7. #7
    Join Date
    Mar 2006
    Location
    CT
    Posts
    51

    Default

    Quote Originally Posted by Felixdacat
    I had to remove the factory bumpstops from the car in the rear. Im running bav springs. Need to get rid of them, tearing up rear tires. Running a low profile tire will not make you bottom out. However the size of the tire will create a problem of rubbing the fender well. My problem is my rear camber.
    Before purchasing rims/tires, I want to replace some suspension components and was wondering if the car would bottom out with the stock tires if Eibach springs are installed? The aftermarket rims are 17 x 8, and the tires are 235/45/17.

    Are you saying I have to remove the factory bumpstops? If so, how?

    Thanks for the replies.

  8. #8
    Join Date
    Jan 2006
    Posts
    370

    Default

    The factory bumpstops are on the rear suspension only. They are not hard to notice. Kinda look like the staypuff marshmellow man. Just pull them off.
    What type of struts and shocks are you going to use? I had to remove the factory stops, cause the Bilstein sports have a bumpstop built into them. I have 18" AC type II's with 235/40/18. no problems with the bottom out. Using the stock rims and tires? you won't have a problem
    Last edited by Felixdacat; 04-08-2006 at 09:44 AM.

  9. #9
    Join Date
    Mar 2006
    Location
    CT
    Posts
    51

    Default

    Quote Originally Posted by Felixdacat
    The factory bumpstops are on the rear suspension only. They are not hard to notice. Kinda look like the staypuff marshmellow man. Just pull them off.
    What type of struts and shocks are you going to use? I had to remove the factory stops, cause the Bilstein sports have a bumpstop built into them. I have 18" AC type II's with 235/40/18. no problems with the bottom out. Using the stock rims and tires? you won't have a problem
    Bilstein Touring. Do they have the built-in bumpstop as well?

  10. #10
    Join Date
    Jan 2006
    Posts
    370

    Default

    Not to sure on the touring, but I do believe all Bil's have built in bumpstops.

Page 1 of 2 12 LastLast

Similar Threads

  1. Will Eibach 525 springs fit a 535?
    By Michael999 in forum 5 Series BMW
    Replies: 8
    Last Post: 04-13-2007, 03:07 PM
  2. Eibach or H&R springs
    By Boone.Msi in forum 5 Series BMW
    Replies: 18
    Last Post: 11-25-2006, 08:46 PM
  3. ::.. Eibach Springs anyone? $202 USD
    By Qube in forum 5 Series BMW
    Replies: 4
    Last Post: 12-23-2005, 06:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •