RIP Ginger?...

[Jay 535i]

If you want to part her out I've got dibbs on your M-tec skirts.

[genphreak]

Bad luck, dude, at least you weren't ther Deer- and no air-bag- bonus.... lucky she wasn't driving a lesser car I guess. I think I'd fix the door (simply a new skin would do) and leave the frame- it doesn't look too bad, the only way to fix it is to drill holes or tack weld things to it to pull the dent, then finish with filler, which in my opinion is doing more damage than is already there.... Nick

[JD525IA]

Seriously, those deer can be very dangerous.

Glad to hear that no one was hurt.

[Rigmaster]

...which leads to what the insurance check is for...I'm still hoping to work a deal with Bret on the door. The estimate determines the payout.

Hey, no problem Bill, I can let you have it for just $500.......



Bret.

[billb]

Hey, no problem Bill, I can let you have it for just $500.......



Bret.

I want to go ahead and swap those doors, so we can at least drive the car until repairs commence. I'll let you know.

$500...ouch!

[Blitzkrieg Bob]

with side skirts...paint it and call it fixed.

I doubt a dent to the rocker will warp the unibody.

Especially a 3600lbs car

[billb]

Thanks Bret!! The door that I swapped was also from a '95 525i, a little later in the run. It uses a completely different door handle setup, I think made by Valeo. I had to move my whole handle over (was planning to just move the lock. By the way, how in the hell do you get the double lock actuator pin back in the plastic keeper??

I've got the door panel back on temporarily so my wife can drive the car (still needs a mirror glass, which I have on order but probably won't be here until Wednesday/Thursday. We have a glass on the car now, but it's pretty cracked up.

Whit, I think Bret mentioned that you had taken some parts from this car. We can now officially say that the left front has been sufficiently scavenged. Looks like that door had a new regulator fitted at some point (it's bolted instead of riveted in). Those heated seats sure look nice too...might keep those in mind for my next E34...

The only thing I really forgot to do was transfer the clip that holds the door panel in the center from my door to the donor door. Once I get that, and get the darn locking rod in place, I can button up the innards.

Thanks again Bret for helping out in the weird Saturday weather. I appreciate that!!

[1995 525i]

Thanks Bret!! The door that I swapped was also from a '95 525i, a little later in the run. It uses a completely different door handle setup, I think made by Valeo. I had to move my whole handle over (was planning to just move the lock. By the way, how in the hell do you get the double lock actuator pin back in the plastic keeper??

I've got the door panel back on temporarily so my wife can drive the car (still needs a mirror glass, which I have on order but probably won't be here until Wednesday/Thursday. We have a glass on the car now, but it's pretty cracked up.

Whit, I think Bret mentioned that you had taken some parts from this car. We can now officially say that the left front has been sufficiently scavenged. Looks like that door had a new regulator fitted at some point (it's bolted instead of riveted in). Those heated seats sure look nice too...might keep those in mind for my next E34...

The only thing I really forgot to do was transfer the clip that holds the door panel in the center from my door to the donor door. Once I get that, and get the darn locking rod in place, I can button up the innards.

Thanks again Bret for helping out in the weird Saturday weather. I appreciate that!!

Glad to hear you have made some progress! Let me know if you need any help.

Michael

[billb]

We dropped it off last Monday. This afternoon, we picked it up. That door really came out nice, Bret. I got everything hooked back up tonight. Finally figured out how to get the locking pin in the double-lock, and that's all back together. I'll shoot some pics later this week. Wifey is very happy, and the bodyshop worked with me on the insurance check

It's amazing how they pulled the rocker back out...it's unnoticeable.

Best,

[Rigmaster]

We dropped it off last Monday. This afternoon, we picked it up. That door really came out nice, Bret. I got everything hooked back up tonight. Finally figured out how to get the locking pin in the double-lock, and that's all back together. I'll shoot some pics later this week. Wifey is very happy, and the bodyshop worked with me on the insurance check

It's amazing how they pulled the rocker back out...it's unnoticeable.

Best,

Good news Bill. I'm looking forward to my "keekbacque"


Bret.