-
-
-
Last edited by Decius; 04-24-2007 at 05:02 AM.
Green Beret Special Ops
seems wierd that its rpm related when not in gear, does it do this when the car is sitting still too? I would guess that the driveshaft or guibo or support collar got damaged but I dont see how it could effect the actual engine balance.
Maybe the flywheel was messed up or bent or something.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Yep Does it shakes when the car is sitting still too.. only a little bit when idle, but if u rev to about 2000rpm its really shaking. Im taking to the mechanic next week for some unrelated work, so ill see what he says i guess,
Cheers
2 Grand Master
Is your car cirrusblau?
Lowered with blue h&r(?) springs, Bilsteins, tint, 19# design 3 injectors, Dual Magnaflow
southwest WA
yep.. and the spoiler is e39 cirrusblau.. a few shades off unfortunatly
5-10 Grand Master
willing to bet you have a broken motor mount, tranny mount or both
all america wants is cold beer warm cat and a place to take a poop with a door on it
Grand Master
Nice color. I agree with Winfred about the broken motor mount. Count the number of fan blades on your fan. You should have 11 (eleven) ...sometimes when a motor mount breaks, depending on which side, the engine can torque and run the fan into the shroud. This will break off a blade or two and can cause an unbalanced condition.
you guys really know your **** hey!!
I just had a look and i counted the blades... 4 have broken off, i had a look at the bonnet and theres a few tiny dents and the paints the slightest bit cracked.
Thanks guys.. what to do now though, take it to a mechanic and see i guess.
how much for a new fan??
what should i do with the crack in the paint??
Cheers
Dan
Last edited by Decius; 03-10-2006 at 10:49 PM.
2 Grand Master
Yikes, those are some nasty dents. You might try a paintless dent removal place, but they might not be able to remove such "sharp" dents. I really dont know, but i would ask around at places like that. Look on www.bmaautoparts.com for a new fan. I also wouldnt drive anymore with the fan like that, more blades could fly off and damage bodywork.
Lowered with blue h&r(?) springs, Bilsteins, tint, 19# design 3 injectors, Dual Magnaflow
southwest WA
Grand Master
How the f**k do you get your car to bottom out at an intersection??? You must have been motoring!Originally Posted by Decius
Hey guys,
I bottomed my car out pretty bad going through an intersection, the underbody i think hit the ground. Cheers guys
Dan
Cheers
Wingman
'89 525i/A Exec 193000kms
'94 Subaru Liberty AWD Wagon
Looking for Merc 300TE
NSW, Australia
Posting Permissions
Reply With Quote
