Reply With Quotewheres the pics of the 4 wheel holeshots? That thing is raw power, what is your estimate of HP & torque?
5-10 Grand Master
hehehe i like my truck
the new guy sunk the big forklift in the mud bad and i yanked it out with the mighty cummins, the lift was on it's axles and dry goes about 19,500# so probably close to 20k wet, i ran 75-100' of chain so i could pull from pavement and found i couldn't bounce it out unloaded, it would just burn all 4 so i grabbed the heavyest car the little forklift could handle and promptly snapped the heavy duty tow rope that i had doubled for some cush, hooked it with straight chain spun all 4 for about 5 feet and popped that pig right outta the hole, you gotta love torque
and it was still 1/4" from touching the overload springs
all america wants is cold beer warm cat and a place to take a poop with a door on it
Green Beret Special Ops
wheres the pics of the 4 wheel holeshots? That thing is raw power, what is your estimate of HP & torque?
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
5-10 Grand Master
they got rolled over by the muddy forklift, stock power is 215 hp and 440 lb foot all i really have on it at the moment is some bosch 330 horse marine injectors that should be good for around 30 hp, i advanced the timing a couple degrees and the fuel pump cam plate is a little forward from stock so theres no telling what it's pumping, i am holding off on real mods till i get a real clutch because the stocker smokes much beyond 650' pounds of torque
Originally Posted by 632 Regal
all america wants is cold beer warm cat and a place to take a poop with a door on it
Posting Permissions