just replaced my hood & trunk struts, WOW What a difference.....

[tim s]

i have been having to lift the trunk the entire way to the top. now i just hit the button & it opens all by itself.
i also will not get hit in the back of my head any more either.
tim s.

[CheapCheap1]

Thinking about change mine too.

BTW, how much did you pay for the struts? And, where did you get them?

TIA...

[uscharalph]

I remember my 1984 733i. Owning that car and this one were 2 different experiences. Washing and detailling constituted the only work I did on that car. I remember using an old golf club to keep the hood up. I credit my brother (Also an owner of a E34) and this board for showing me how to DIY in many cases on this car.

[tim s]

i believe the hoods were around $20-22 each & the trunks $29-30. not sure the exact amount, i needed them.
tim s.

[brodee]

I use a hockey stick on mine to keep it from closing on me.

I'd replace them but I don't think that will keep me from getting hit in the back of the head, I'm still married

[Qube]

How did you manage to reach around and snap the trunk struts out?

[tim s]

the strut. the hard part was the carpet. it only took me about 1 minute each.
make sure you have something or someone holding the trunk open when you do this. my wife said when i pulled off the strut the trunk lid got heavy enough to drop quickly.
tim s.

[Gene in NC]

Replaced one on trunk and discovered didn't need the second.

[zygoteer]

I replaced both my hood (bonnet in England!) gas struts as it nearly came down on me on a windy day.

Cost was £18.43 each from the dealer (was expecting more), but I considered it a safety issue anyway.

[swenpro]

i have been having to lift the trunk the entire way to the top. now i just hit the button & it opens all by itself.
i also will not get hit in the back of my head any more either.
tim s.

Tim,

Is it the GAS PRESSURIZED SPRING/TRUNK LID SHOCK with part number 51248110327 that you replaced?

My trunk doesn't lift on its own, so I'm assuming this is what I need... I would get the parts from the dealer, but I see BMA has one made by MEYLE for $20 and one made by SACHS for $27. Thanks in advance...