First Time Rear Brake Job

[Anton CH.]

I have a working set of rear calipers I can sell to you. And no you don't need a pressure bleeder to change calipers. I changed all four calipers without any problems.

[moots]

think you need an air compressor to get the piston out, I believe theres a write up on Brunos site...

book mark this:

http://www.bmwe34.net/E34main.htm

if you don't have an air compressor,you can remove the piston by pressing on the brakes.....gently and in small increments,with the pads removed of crs.a second person to monitor the piston travel helps.......this is thru my own experience...