Quote Originally Posted by BeemerbabeTX
My Fuse box does not have the listing of what the fuses go to, I cannot read the electrical diagram and have tried all the idea's I have read on here and researched via the internet to solve my windows not rolling up and no power to my after market stereo. So, hopefully the actual manual will help me with the fuse box. I have tried the suggestions in the Haynes manual as well and still no luck. I would like to know before I spend the $34.95.

Beemerbabetx
I have both the Chilton 3-Series, and a Haynes 3 & 5 Series Manuals.
Neither is worth a damn, but I can just get by with both, costing about
$25 apiece.
I doubt the Bentley manual is much better.
Thanks to Bill R. for the fuse diagram.

Re: Your power window problem.
Suspect the fuse if none work.
Else suspect the switch, connectors, and then the brushes that order.
Use an ohm meter to continiuty check.
Lacking that, use a jumper power test and isolate the problem.

Good Luck