doing flex disc and centre bearing tomorrow. any advice?

[Jeff N.]

.

1 - good time to replace your exhaust donuts or have some spares on hand.

2 - if you undo the exhaust at the manifold, a) spray the nuts slightly with some pentrating oil and b) run the nut forward a 1/4 turn before you back it off. somewhat easy to snap off the studs.

3 - great time to rebuild you shifter linkage. did I say great time? REALLY great time. you are all the way in there. expect to have to order the parts. search the archives as some good lists have been posted.

4 - wanna shorten your shifter throw? order up a z8 shifter arm for about $55 and swap that too.

5 - the guibo is easy. the center bearing can be a trick to remove. a gear puller can be helpful to pop it off.

6 - got a 535? be sure to be careful with the rear cv joint. it will be exposed when you drop the driveline.

ok..that's I can think of for now. have fun and good luck.

Jeff