Quote Originally Posted by shogun
I have not heard of a defective plug. Just no contact etc.
Have you cleaned the contacts in the back of the cluster all with electronic contact cleaner?
Same do with the check control module. Remove the CCM, plug is in, wiggle it, sometimes it has bad contact.
That sounds strange to me.
Do you have the possibility to try or borough another cluster just to check it out? Maybe someone in your area can lend you one for a test.
Hi shogun,
Do you know if I can connect the cluster with the blue plate to mine? It has similar connections, only the brown plug missing the pins for the cluster which is inside it?
I did clean with wd40 all the connections.