Originally Posted by
jaylebo
I already did. I only turned to the dealer after discovering my own inabilities. Needless to say, I'm going to try harder now.
Yup, stealers suck (the money out of your pocket) and using them is no guarantee of proper repairs.
Here's a tip for installing the front turn signals:
After removing the old unit (3 screws, one points at the outside of the car and two point to the front), notch the plastic housing on the new assembly where the screw fits toward the outside and partially install the screw in the fender. You can then slide the new lens back over the screw instead of fumbling with it.
To fit the other two screws, use some masking tape to hold the screw to the screwdriver - this will help you get them started and not drop them into the bottom of the fender.
Anthony
03/64 production
'91M5 - 11/90, was mine, it's Jim's now.