anybody else reloading?

[winfred]

i love my dillon 650 progressive press, oh so much faster then the rcbs single stage i used, it's a shock to go to a fast press when it took you a hour or more of work to run off 100 rounds, then all the sudden you can do it in 10 minutes while farting around. i've only put about 2000 rounds through the 650, i burn about 80 rounds a week competing in bowling pin matchs, that triples when i go to play, .357 mag with buying cast lead bullets $2.25 per 50, copper plated lead $3.35 per 50, jacketed hollow point/full metal jacket about $5 per 50, i could shave some more money off of the cast lead if i threw my own lead but i aint that dedicated

[AZ_Jason_S]

I'm too lazy and don't shoot enough. When I shoot, I tend to stick to my .22's for cost effectiveness.

I work about a mile from Dillon. In fact I drive by them everyday.

[bahnstormer]

hand press em everytime (all 2 times heheh)

[kiNGMak]

Glocks dont take to kindly to reloads.. wish they did... go thru 500+ rounds per 1-2 weeks

[bahnstormer]

if ya hand load em, each shot counts more heheh =]

[winfred]

the guy i work with reloads for his .40 glock, he use to shoot competiton and has probably run 40k plus reloads through his last two glocks, just keep a eye on the brass from the partially unsuported chamber

Glocks dont take to kindly to reloads.. wish they did... go thru 500+ rounds per 1-2 weeks

[TheGeak]

whoa....didn't know i signed up to the NRA's BMW web-site

I need to get into shooting, it was a nice stress relief

[winfred]

bowling pins are fun, check around in your area it's a blast, my best time is around 4 seconds that's among the fastest at my range, but i aint even a wart on the ass of a real pin shooter at 2 seconds. 5 pins 25 feet away completely off of a 4' tall 6'x3' table

[Elekta]

I really only shoot these browning superposed 12 and 20 I recently got from my gramps.

[winfred]

OOOOOO perdy