Rattling/clunk in the front, when driving on uneven surfaces.

[Andryuha]

Definetlt torque the bolts, if not tight than they will start to wobble in the taper fit hole and cause you more problems later. Make sure the bolts for the sway bar links are still tight. Make sure the strut collar nuts are tight.

Well, by not torqueing the bolts properly I meant that I just tightened them as hard as I could, and I keep checking if anything's lose pretty frequently.

[Bill R.]

Raise the car up you usually have enough room to reach in with a big pipe wrench in between the spring coils and tighten it down some more..

Well, by not torqueing the bolts properly I meant that I just tightened them as hard as I could, and I keep checking if anything's lose pretty frequently.