this is probably better than using a holesaw to access it from the outside!
had this happen, i just stumbled onto this bulletin going through the oldest tis i have that may help some.......
old link does not work anymore, shogun saved a copy http://s71.photobucket.com/user/shog...moval.jpg.html
Last edited by shogun; 03-25-2014 at 04:18 AM. Reason: added new link
this is probably better than using a holesaw to access it from the outside!
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Talking about last measures!Originally Posted by 632 Regal
Ralph Mendoza Jr. - Long Beach, CA
Thought it was standard practice.
Originally Posted by uscharalph
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Hole Saw then pops-a-dent and you're good to go!
Good one Bill. I had a customer asking me exactly that, how do you get the darn panel off and door open when the actuator is stuck in the locked position. Oh, and you stored the pic on Bimmer.info. This is certainly one for the archives. kewl
A Bimmer Nut for sure: '04 530im (current daily driver), '97 m3, '98 323is, '99 Z3, '01 740iL, '06 330cicm zhp, '02 R1150R, '69 r60, Owner/Operator of www.Bimmer.info and www.BimmerNut.com
And I still maintain: '90 535im (sold to daughters best friend, one of my favorite bimmers), '92 525im (daughters other best friend now drives this one).