My fuel gage just stop working the other day just after I filled the tank.
My gauge would also get stuck around 1/2.
It turned out the plastic cover on the sender had come loose due to a busted out mounting hole in the bottom and was interfering with the movement of the float.
Be careful when pulling the sender, those wires inside are very thin, and could easily be broken as the cover gets pushed up against them during removal.
A couple of zip ties to hold the cover to the assembly and it reads correctly.
.
Vee ave vays of dealing vid your kind...........
Once again Shogun. Very nice writeup! I think I'll live with the problem I have in the last quarter of the tank for a while, though.Originally Posted by shogun
Ralph Mendoza Jr. - Long Beach, CA