GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 5 of 5

Thread: Jammed shock rod nut

  1. #1
    Join Date
    Jan 2005
    Location
    Williamsburg, VA
    Posts
    116

    Default Jammed shock rod nut

    As I've posted before, I'm midway through a spring replacement job. I've successfully removed the rear suspension from the wheel well, and am having difficulty getting the nut off the top of the shock rod. Here's what I've done so far...

    - Soaked the area in PB Blaster
    - Compressed springs so that there is no pressure on upper spring mount
    - Used a 7mm wrench and a crescent wrench as pictured here. Nearly stripped the 7mm top of the bolt.
    - Wrapped the top of the strut with a strap wrench to keep it from spinning. Tugged away with a 20mm wrench.
    - Tapped 20mm wrench with hammer.

    Still no luck. Is there a trick to this, or do I just need to keep pulling? So far, the biggest difficulty in this project has been loosening nuts & bolts!

    Thanks again for everyone's help in this little project.

    Norman

  2. #2
    ukm5 Guest

    Default

    if ur replacing it cant you just cut through the nut with an angle grinder?

    ud find that the heat will generally free it up with grinding without damaging the surrounding panel

  3. #3
    Join Date
    Oct 2004
    Posts
    3,395

    Default

    Impact wrench


    best, whit

  4. #4
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    Id drop it and impact it...

    edit: didnt I just hear an echo?
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  5. #5
    Join Date
    Mar 2004
    Posts
    404

    Default

    Although I've never had this problem on a rear shock, on front struts I wrap an old leather belt around the shock rod as close to the shock mount as possible. Put a pair of vice grips over the belt and clamp tight. Use socket/ box end wrench on shock nut.

    Relaxing the spring tension before you loosen the nut may make it more difficult. Instead of using a 7mm wrench try a 6 point socket and breaker bar.

    Paul Shovestul



    Quote Originally Posted by ElNormo
    As I've posted before, I'm midway through a spring replacement job. I've successfully removed the rear suspension from the wheel well, and am having difficulty getting the nut off the top of the shock rod. Here's what I've done so far...

    - Soaked the area in PB Blaster
    - Compressed springs so that there is no pressure on upper spring mount
    - Used a 7mm wrench and a crescent wrench as pictured here. Nearly stripped the 7mm top of the bolt.
    - Wrapped the top of the strut with a strap wrench to keep it from spinning. Tugged away with a 20mm wrench.
    - Tapped 20mm wrench with hammer.

    Still no luck. Is there a trick to this, or do I just need to keep pulling? So far, the biggest difficulty in this project has been loosening nuts & bolts!

    Thanks again for everyone's help in this little project.

    Norman
    .....Got to keep the loonies on the paath.

Similar Threads

  1. Elec window jammed.
    By ss2115 in forum 5 Series BMW
    Replies: 3
    Last Post: 05-15-2009, 07:12 AM
  2. Gearbox jammed on the road!
    By MurderBlack in forum 5 Series BMW
    Replies: 3
    Last Post: 09-03-2008, 11:27 AM
  3. jammed CD player--how to fix?
    By Dash01 in forum 5 Series BMW
    Replies: 7
    Last Post: 03-07-2005, 03:54 PM
  4. Trunk lock jammed
    By mikemaster in forum 5 Series BMW
    Replies: 1
    Last Post: 08-24-2004, 01:45 PM
  5. jammed ignition
    By jackieleung61 in forum 5 Series BMW
    Replies: 2
    Last Post: 04-19-2004, 09:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •