...if you haven't programmed it...or if the previous owner programmed it but the car's power (battery) has been disconnected...the programming has been lost. You must have the full featured OBC to use this function. You also can choose any or all of the OBC info to display...personally I only programmed HR/DATE/AVG MPH 1/RANGE.
To program the BC functions, turn ignition to position 2, then:
1. push the turn stalk in towards the steering column and hold for apprx. 3-5 seconds until PROG 1 appears in the instrument cluster display.
2. press the desired (OBC) info button(s).
3. Press the S/R button on the OBC when finished
If you have an owners manual..this info is in there under REMOTE CONTROL.
Originally Posted by Qsilver7
...if you haven't programmed it...or if the previous owner programmed it but the car's power (battery) has been disconnected...the programming has been lost. You must have the full featured OBC to use this function. You also can choose any or all of the OBC info to display...personally I only programmed HR/DATE/AVG MPH 1/RANGE.
Reply With Quote