GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 2 of 2

Thread: NE1 run 245/50-16 on 7.5" rears on lowered

  1. #1
    Join Date
    Dec 2003
    Location
    San Luis Obispo, CA
    Posts
    134

    Default NE1 run 245/50-16 on 7.5" rears on lowered

    car? Will be changing wheels from stock 15" baskets to Hartge 16x7.5 w/13mm offset. The Contiextreme has a cross section width of 10" compared to 9" for the yoko S2's I have on now. That is only 1/2" per side and it looks like there is room but I don't know for sure how the Hartge rim will fit the hub.
    i.e. will it distribute the extra width equally to the inside and outside.
    Last edited by billy in slo; 03-03-2005 at 12:20 PM. Reason: sp

  2. #2
    Join Date
    Dec 2003
    Location
    San Luis Obispo, CA
    Posts
    134

    Default

    never mind, I'm an idiot! I just went and rechecked my clearences and I have a good 1-1/2" from exist. sidewall to lip, so I am sure I'll be fine.

Similar Threads

  1. Remaining Squeak from Rears
    By Dathaeus in forum 3 Series BMW
    Replies: 1
    Last Post: 12-15-2008, 05:49 AM
  2. Which Brakes Do I Need? (Monroe for Rears)
    By Dathaeus in forum 3 Series BMW
    Replies: 0
    Last Post: 10-31-2008, 02:03 AM
  3. Clear corner rears!
    By Ferret in forum 5 Series BMW
    Replies: 11
    Last Post: 04-06-2008, 11:08 AM
  4. Which non hella red/clear rears are best?
    By nixter in forum 5 Series BMW
    Replies: 10
    Last Post: 09-08-2006, 12:32 PM
  5. Check your inside rears....!!!
    By gordon in forum 5 Series BMW
    Replies: 8
    Last Post: 03-15-2004, 06:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •