1 Attachment(s)
Here's the Floor Jack I got from Pepboys
It's a Torin Big Red and a bit of an overkill (3 tons) but it seemed to be a good deal--$59.99 with $10 mail-in rebate, and will raise the car up to 20". The only thing I don't like about it is that it has a slow lift unlike the other one I have which raises the car pretty fast. I'm still deciding whether to keep it or not and if not I'll probably splurge and get an aluminum one and be done with it.
Interesting, saw a real nice Al Powerbuilt floor jack at Kragen and then saw the same one at Pepboys under Torin Big Red. If you got the bucks, buy a product, put your name on it and mark it up... capitalism at its best.
Was at Sears buying some tools and thought I look at their floor jacks. Almost gave into temptation. There was a Craftsman 2.5 ton floor jack (pretty nice I might add) with 2 jack stands marked down from 149.99 to 99.99.
That's got the 3-yr warrantee?
Quote:
Originally Posted by Hector
Was at Sears buying some tools and thought I look at their floor jacks. Almost gave into temptation. There was a Craftsman 2.5 ton floor jack (pretty nice I might add) with 2 jack stands marked down from 149.99 to 99.99.
FWIW I'd still recommend against the Craftsman. Love the tools, hate the jack - it's left me stranded twice now! Well - not stranded, but stand-ed (up on stands) :)
- Robin
Thanks Ryan. I had a gut feeling that someone hear...
was going to tell me that Torin is not reliable since I've never heard of this brand before. I had the guy at Pepboys open the box up to give me extra reassurance. The floor jack frame looks like is well built but of course couldn't tell ya anything about how well built the hydraulics is. As I said before, thinking about returning thing since I haven't used it yet.
Quote:
Originally Posted by ryan roopnarine
my smaller torin was dead within the year. i'd hesitate buying another one (i'm using the factory jack right now) unless it had a good warranty. i changed the oil at least once before this happened and kept it topped up after it started dying , it eventually died completely.
Hector if you're thinking about returning it I would consider buying the
2 ton aluminum one thats on sale right now at checker Kragen for 99.00
The same jack is at costco and sams for 150... It looks like an improved version of the jack that i bought a couple of years ago for 350 from costco and took back after i broke the rear casters off the first time i used it... The newer one looks like it has much stronger casters and is rated at 2 tons instead of the 1.5 they were originally at...I'm probably going to go buy myself one soon for a christmas present since they go lower and the new car is much lower than the 535...
Quote:
Originally Posted by Hector
was going to tell me that Torin is not reliable since I've never heard of this brand before. I had the guy at Pepboys open the box up to give me extra reassurance. The floor jack frame looks like is well built but of course couldn't tell ya anything about how well built the hydraulics is. As I said before, thinking about returning thing since I haven't used it yet.
Thanks Bill. This is good timing and I'll check out the one...
you described at Kragen tonight. I need to get a floor jack, like, now as I'm planning to get under the car tomorrow to troubleshoot some driveshaft vibrations I've had for a while. Also, the suspension is starting to get a little loose, and after I drive over a pot hole or a pump while making a right turn, it shakes momentarily and feels like the front end suspension is going to come off.
Quote:
Originally Posted by Bill R.
2 ton aluminum one thats on sale right now at checker Kragen for 99.00
The same jack is at costco and sams for 150... It looks like an improved version of the jack that i bought a couple of years ago for 350 from costco and took back after i broke the rear casters off the first time i used it... The newer one looks like it has much stronger casters and is rated at 2 tons instead of the 1.5 they were originally at...I'm probably going to go buy myself one soon for a christmas present since they go lower and the new car is much lower than the 535...
The one i broke from costco had excellent control releasing the
pressure. Most of the floor jacks that use universal joints instead of gears to operate the release are fairly smooth and easy to control...
Quote:
Originally Posted by Tiger
How good was the down control on these aluminum jacks? I want a replacement jack... my china made is till working after nearly 10 years... but down control is downright dangerous if not careful.
Thanks Charlie. Swar bar links is at the top
of my list. Not long ago the tie rod ends and the stabilizer bar links were replaced. The upper and lower control arms on the drivers side have never been replaced since I've owned the car so I gotta get under the sucker and see if I can rattle their cages. Last time I checked, the boots amazingly still looked good. I had the 750 bushings installed about 3 years ago on both sides, and the car hasn't been driven much so I think they should be in good condition. We will see what I uncover later today.
I saw those ramps next to the Al floor jacks at Kragen yesterday and the thought crossed my mine to get them. I will definitely buy them later.
Yeah Bill, the Torin floor jack was based on gears instead of the univ joint. Man, that thing is about 100 lbs... almost pulled a muscle lifting it when it was returned. The Al one is half the weight and since I'm in the process of moving, I keep the floor jack in the trunk so that it is easy to haul around and get to.
