as far as i know, and if i recall correctly
3mm pads make the car sit about 6 mm lower.
rtabs = rear trailing arm bushing.
Yes, those are what I was talking about earlier.
Printable View
as far as i know, and if i recall correctly
3mm pads make the car sit about 6 mm lower.
rtabs = rear trailing arm bushing.
Yes, those are what I was talking about earlier.
These aren't the big subframe bushings are they? If these are the ones you're talking how, how would I be able to adjust to them?Quote:
Originally Posted by attack eagle
Here it is. Sorry but this is about as lifelike as it gets with this pic, so i didnt put a lot of effort into placing the vents. I guess it'll do as a sketch, eh?
http://i218.photobucket.com/albums/c...002401-2-2.jpg
Repentokyo doesn't have a TUQuote:
Originally Posted by bad_manners_god
ew m3 vents on an e34 so wrong
I thought it was picture of a hamburgerQuote:
Originally Posted by Jon K
Front 25
rear 23.75"
about the same as twak in cm
63.5 ish front
60 rear.
of course thats with 1/4 tank of fuel and no passengers or cargo.
Actually, they are m5 vents, but im not putting the m5 badge on them.Quote:
Originally Posted by Jon K
Attack-eagle: Huh?
Pretty nice, It's only 1 vent on each side of the hood near the front. Anyways, looks really good, thanks.Quote:
Originally Posted by Dragunov
I cant wait till I can post pics of the finished product.
the spring pads are a metal plate that sits in the perch.The std pads are 9mm,the 3mm one are 3mm so 9-3=6,cars sits 6mm lower....