i took out 2 of the 10mm bolts then used 2 pairs of waterpump pliers against each other , or if you have one , a 32mm spanner for the viscous fan
Printable View
i took out 2 of the 10mm bolts then used 2 pairs of waterpump pliers against each other , or if you have one , a 32mm spanner for the viscous fan
Hmmh,
no evolution of fan clutch tools?
Show off with the 'special tools'.
I am sorry to revive an old thread, but can anyone tell me the OD of shaft that the tool has the clear that is in the middle of the pulley in between the two 10 mm bolts and the spacings in between the 2 bolts and the shaft.
I am going to fab one up before i goto holidays