My Seat

Hello All,

A few months ago I got rid of the twist from my driver's seat. However, when I reinstalled the seat it was too high and wouldn't come down. When I press the appropriate button I hear clicking (like gears almost engaging). I've finally got some time to fix the problem so

Here's my question...

Underneath the front of the seat there are two motors (#2 in pic). The rear motor adjusts the tilt in the seat and those were the cables I adjusted.

1. Does the front-most motor control the height of the seat?

2. If not, then where do I adjust or what do I replace?

http://www.realoem.com/bmw/diagrams/i/h/39.png



Thanks!
-ashley

Yes, follow the motor's cables back to the box(es). Sounds like the cable ends just got unseated.

Good luck, buddy!

best, whit

Quote:

---

Originally Posted by lowell

Yes, follow the motor's cables back to the box(es). Sounds like the cable ends just got unseated.

Good luck, buddy!

best, whit

---

Whit,

Thanks and good to hear from you. How are things in the frozen north?
-ashley