PDA

View Full Version : abs questions???



tim s
01-04-2005, 08:11 PM
i purchased a set of staggered 17" rims. will i have any abs computer problems if i use a pair of pilot sports with 1/3 tread on the front (235/45/17) & a new set of pilot sports full tread (255/40/17)?
my mech. suggested i check on this before purchasing new tires.
thanks
tim s.

winfred
01-04-2005, 09:26 PM
255/40-17 4.0 in 12.5 in 25.0 in 78.6 in 806 / mile N/A
235/45-17 4.2 in 12.7 in 25.3 in 79.6 in 796 / mile 1.2%

tim s
01-04-2005, 09:34 PM
tim s.

winfred
01-04-2005, 09:35 PM
http://www.powerdog.com/tiresize.cgi

Dan in NZ
01-04-2005, 09:36 PM
I wondered about this too... My rear tires have 1.3mm of tread left, which is illegal, but the fronts have 2.2mm so I was going to just replace the rears before my next inspection.

How much difference in wheel speed will the computer allow before it throws an ABS fault??? I've heard that cars with stability control type systems have a much lower threshold, so need all the tyes to be replaced at the same time.

winfred
01-04-2005, 09:36 PM
http://www.bncoffroad.com/tire_gear_cal.html


http://www.powerdog.com/tiresize.cgi

winfred
01-04-2005, 09:39 PM
both systems use the same wheel sensors, they are not that precise that a dozen revolutions or so per mile one way or the other makes a difference


How much difference in wheel speed will the computer allow before it throws an ABS fault??? I've heard that cars with stability control type systems have a much lower threshold, so need all the tyes to be replaced at the same time.

Dan in NZ
01-04-2005, 09:47 PM
Ahhhh... Just a plot for dealers to sell more tyres. The Lexus dealer told my mum that if she didn't replace all four tyres on the LX470 the stability control would throw a fault... I guess they saw her coming haha!