Dan in NZ
06-23-2004, 12:49 AM
I did the obc retrofit a while ago, but still haven't managed to hook-up the outside temp sensor. I read on Johan and Seans E32 picture that there is a "bumper wiring harness connector" that powers the temp sensor and foglights. As shown in this pic.
http://bmwe32.student.utwente.nl/johan/OBC_temp/connector-1.jpg
I have found one half of a connector that looks exactly like the one in that pic, just next to the power steering reservoir, but there's nothing plugged into it!!! If this was what I'm looking for, I would assume the foglights would be plugged into it... Can I tell if the connector on my car is wired back to the obc??? If this is it, which pins are for the obc???
http://bmwe32.student.utwente.nl/johan/OBC_temp/connector-1.jpg
I have found one half of a connector that looks exactly like the one in that pic, just next to the power steering reservoir, but there's nothing plugged into it!!! If this was what I'm looking for, I would assume the foglights would be plugged into it... Can I tell if the connector on my car is wired back to the obc??? If this is it, which pins are for the obc???