Connector Question

[MBXB]

Greetings!!
This connector sits right under the washer tank. The plastic had crumbled and two pins were left.
I taped it off in red to contrast it.
I think it's for the ABS sensor since the Anti Lock light was lit the next start.
Is it polarity dependent or can I plug it in and shrink tape it?
Thanks in advance.
7772MBXB

[shogun]

Ramon, I had the same on my E32 750. One time even the plug side coming from engine room. I had a spare wire loom and just cut the plug with some wire pigtail off and resoldered it and added shrink tape, works since about 1 year without problem. Here is another sample we found on my friends 750, did the same, cut and soldered and shrink taped it
ABS Sensor Photo by shogun_bucket | Photobucket (http://s71.photobucket.com/user/shogun_bucket/media/ABSsensor.jpg.html?sort=6&o=11#/user/shogun_bucket/media/scaledphpserver29filenamep2020327.jpg.html?sort=6&o=11&_suid=136642768100805184600192977329)

[MBXB]

Thanks, Erich