shogun
01-18-2012, 08:47 PM
nozzles were clogged. I removed them and put them in concentrated vinegar after disassembling overnight. Look what dirt I found inside
http://www.pictureupload.de/originals/57699/190112022428_auto_windcreenwaher.jpg
now they work again as they should do.
Vinegar is a weak form of acetic acid that forms through the fermentation of sugars or starches. I also use vinegar for the bathroom. To remove corrosion or chemical build-up from showerheads, soak in vinegar overnight.
Same applies to the washwater nozzles here.
http://www.pictureupload.de/originals/57699/190112022428_auto_windcreenwaher.jpg
now they work again as they should do.
Vinegar is a weak form of acetic acid that forms through the fermentation of sugars or starches. I also use vinegar for the bathroom. To remove corrosion or chemical build-up from showerheads, soak in vinegar overnight.
Same applies to the washwater nozzles here.