PDA

View Full Version : oem head unit removal



jayh3
02-27-2011, 11:57 PM
I need to remove my Alpine head unit. The red light is on so does that mean I have to disconnect the battery so the alarm won't go off?? Or if I leave the key in the ignition, will that cancel it?

BMW4LIFE
02-28-2011, 02:11 AM
not sure about this red light but to remove it is very simple.

1) get a fine flat head and flip the side clips on the lateral side of the deck

2) get a pent "screw driver" (but I have read other members able to use small hex to unscrew it

3) it should then slide out

4) gently unplug the wired and you are done

simple

jayh3
02-28-2011, 09:29 PM
The red light blinks on and off and is the anti-theft light, but I'm not sure if it turns on the alarm. However I believe if the key is in the ignition the alarm shouldn't go off??

jayh3
03-10-2011, 05:14 PM
Just verified that the red LED light is NOT connected to the alarm system.

Russell
03-11-2011, 08:53 AM
blinking light should go out when key is in ignition and in position 2 or 3. it will start blinking if car is turned off and you mess with the radio contriols.