PDA

View Full Version : EML on 95 525i?



Russell
02-12-2010, 12:08 PM
Does the 95 525i with the M50-TU and ASC+T have EML or "drive by wire" sytsem? I hear the earlier 535i does.

Just wondering as I do not want my car to go "Toyota" on me from electronic interference. :)

shogun
02-12-2010, 07:57 PM
no worry, even the 1986 E32 750 already has EML, never had problem with that so far.

Russell
02-13-2010, 12:10 AM
no worry, even the 1986 E32 750 already has EML, never had problem with that so far.

Interesting, not really worried about the car being a runnaway, but does the 95 525i with Asc+T have EML? I think it does

shogun
02-13-2010, 02:41 AM
that is easy to check
http://bmwfans.info/parts/catalog/E34/Sedan/USA/525i-M50/LHD/A/1995/may/browse/fuel_preparation_system/
the answer is NO. ASC+T has a bowden cable. Already the E32 740 which came out earlier had again bowden cable. Only 735 and 750 had EML.

Russell
02-13-2010, 04:42 AM
Thanks, I appreciate the link.

ryan roopnarine
02-14-2010, 06:47 PM
You actually have a greater probability of having an unintended acceleration in your 525i than someone might in their toyota, as there was an issue with cables falling out of the throttle body. I had my cruise control cable fall out of my 525i and had a minor event. Luckily it was at stop and go speeds, and I was able to hold the car with the brake and pull off, wherein I pulled the cable off and hung it against the manifold with a zip tie. I think that don gale sold some clips that would keep your throttle cables from falling out.

Russell
02-14-2010, 08:35 PM
You actually have a greater probability of having an unintended acceleration in your 525i than someone might in their toyota, as there was an issue with cables falling out of the throttle body. I had my cruise control cable fall out of my 525i and had a minor event. Luckily it was at stop and go speeds, and I was able to hold the car with the brake and pull off, wherein I pulled the cable off and hung it against the manifold with a zip tie. I think that don gale sold some clips that would keep your throttle cables from falling out.
There was a recall for cruise control cables that installed clips to make sure the cables stay in place. Mine has had that done. Wonder if that simple of an recall would fly today as everyone seems to need to be over nannied.

shogun
02-15-2010, 02:33 AM
Thomas Meacham sells these nice pieces for that
http://www.bimmerboard.com/forums/posts/723392

Russell
02-15-2010, 02:52 AM
Thomas Meacham sells these nice pieces for that
http://www.bimmerboard.com/forums/posts/723392
I just ordered them for my M50. Intersting, never know what you can find on these forums. Thanks for posting.

shogun
02-15-2010, 03:13 AM
maybe I order also some for my new E36 M3 02/1998, but still have to get more experience with the M3, all new to me.
That is the U.S. version M3, not EURO.

Russell
02-16-2010, 10:29 AM
I just ordered them for my M50. Intersting, never know what you can find on these forums. Thanks for posting.

While I ordered them, I have received no notification of my order or that they still are available. have no idea where this guy is located. Just an observation at this point.

Russell
02-17-2010, 12:44 PM
While I ordered them, I have received no notification of my order or that they still are available. have no idea where this guy is located. Just an observation at this point.

Still no notification of my order or response to two e-mails. I realize thisis only two days. Just concerned. I payed via paypal.

Russell
02-19-2010, 05:20 AM
PayPal shipping notice today. Looks like everything is in order.

Russell
02-25-2010, 08:38 AM
Received bushings. Very well made. Will install when warmer and i have more time.