PDA

View Full Version : speaking of chips, mark...



micjordan
06-05-2004, 08:50 AM
I have a 93 740. I see you dont specifically list chips for the 740 but wouldnt a 540 chip for that same engine work? Is there a number somewhere I can give you that will tell you which chip I need? The engine was replaced about 50k ago so it is newer than 93.

-Adam

MarkD
06-05-2004, 09:27 AM
I have a 93 740. I see you dont specifically list chips for the 740 but wouldnt a 540 chip for that same engine work? Is there a number somewhere I can give you that will tell you which chip I need? The engine was replaced about 50k ago so it is newer than 93.

-Adam


Hi Adam,
have a look on the DME and see if it has the number 1 744 050 on it. Actually, there are slight variations in the chips for all the M60 motors and it would be best if I could read your stock chip and make a version from that. If you have access to a reader, that would be the way to go. Alternatively I can arrange to have your chip read in the USA. Send me an email if you would like to discuss this further.

Mark