PDA

View Full Version : Coolant Change



Golgade
10-22-2008, 09:56 PM
Hello,
I tried looking through the forum for where the coolant change plus is but I just couldnt find it.......so where can I find that bad boy? And how much coolant do I need to buy for a 530i?
Thanks
Dan
95 530i

glen-sj
10-23-2008, 09:01 PM
Just did mine 2 weeks ago. Bentley manual states the M60 coolant capacity is 12.5 liters (13 qt.) and is self bleeding.

pgrindstaff
10-23-2008, 09:46 PM
There is a drain plug in the radiator and on the engine block. I believe there are actually two on the block, one on each side behind the exhaust heat shields (aluminum sheet metal). I only drained coolant from the right side and the radiator.

632 Regal
10-23-2008, 11:31 PM
after you flush it all out add 50% of the coolant before you add water or else you may have a weak mixture from water remaining in the block.

Golgade
10-25-2008, 05:46 PM
You know I have been blindly filling this car with more and more distilled water as the old coolant leak away.....Sounds like that was a pretty poor choice. Why do you need such a careful mixture of coolant to water?
Dan Lafley
95 530i

Tiger
10-25-2008, 06:07 PM
Freeze protection mainly... or it will crack your engine block and radiator on super cold day.

bad_manners_god
10-25-2008, 11:55 PM
You know I have been blindly filling this car with more and more distilled water as the old coolant leak away.....Sounds like that was a pretty poor choice. Why do you need such a careful mixture of coolant to water?
Dan Lafley
95 530i

Because too much water can cause corrosion and freeze up in your block like Tiger said

and too much anti-freeze will just eat away at the aluminum head.