PDA

View Full Version : Expansion tank leak before & after pics



2fast
06-27-2008, 11:41 PM
Got a hair line crack in the tank had to glue& bog it up as this is my daily ride!
Got part and swapped it out,Two weeks later:D
Check out my pic's.

The plastic was so brittle you could run your fingernail against & it would turn to powder!

It was the original ,had a factory clip on one of the lines.

Now I can check my coolant level with out shaking the car its so clear!!


http://i295.photobucket.com/albums/mm141/2fast4u007/IMG_0764.jpg

http://i295.photobucket.com/albums/mm141/2fast4u007/IMG_0766.jpg

http://i295.photobucket.com/albums/mm141/2fast4u007/IMG_0770.jpg

http://i295.photobucket.com/albums/mm141/2fast4u007/IMG_0767.jpg

shogun
06-28-2008, 06:37 AM
I also changed my one 2 years ago, the neck broke underneath when I wanted to remove the hose.
Better do it in advance before it breaks while driving, could be more costly then.
And better install a new one, not one from a 15 year old car, all plastic on these cars is brittle then.

2fast
06-28-2008, 08:40 PM
I got a hair line crack under the right arrow fill line.

I smash open the old one and the dirty looking sludge was only a thin film mostly discoloured plastic.

Cost me $150 NZ(from $tealer) + clips and a litre coolant, an easy fix.

Looks good too.

filmy540i/6
06-28-2008, 10:00 PM
:p LOVE the ghetto patch job! BTDT...

Dave M
06-28-2008, 10:56 PM
Impessed the original lastest this long.

attack eagle
06-28-2008, 11:23 PM
I'm still on the oem rad myself.

Dave M
06-28-2008, 11:34 PM
I'm still on the oem rad myself.

Thats incredible. few can sat that.

attack eagle
06-29-2008, 12:27 AM
192k... :)