PDA

View Full Version : swapping m20 for a m30



tintrx
01-23-2008, 12:51 PM
I'm looking at a possible motor swap from an 89 535i m30 to 89 525i m20. Just trying to figure out if the transmission will bolt up and what other modifications; if any, will be necessary to make this swap possible. If Anyone who's ever done this swap could give any insite on this procedure, I would certainly appreciate any input that you could give to help.

Thanks in advance,

Jeff

Dave M
01-23-2008, 01:18 PM
Assuming an automatic??

The search button is your friend. Someone who knows will inevitabely chime in, but for now, have a look at these,

old thread (http://www.bimmernut.com/forum/showthread.php?t=9537&highlight=m20+m30+swap)

another old thread (http://www.bimmernut.com/forum/showthread.php?t=34138&highlight=m20+m30)

Dave M
01-23-2008, 01:23 PM
m30 swap into an e30 with pics (http://www.unitedbimmer.com/forums/e21-e30/8751-e30-m30-project-has-begun.html)

tintrx
01-24-2008, 01:33 AM
Thanks for the input Dave, I believe my initial resevations have been satisfied for now. I'm hoping to be finished with my engine swap within the next week or two

Dave M
01-24-2008, 10:31 AM
Thanks for the input Dave, I believe my initial resevations have been satisfied for now. I'm hoping to be finished with my engine swap within the next week or two

Glad you weren't scared away by some of the info.

Good luck with the project and please post any observations for others to learn from.

Dave M