PDA

View Full Version : ebay: self dimming mirror...



BFEINZIMER
07-07-2007, 04:53 AM
http://cgi.ebay.com/ebaymotors/BMW-Rear-View-Mirror-E32-E34-E36-M3-M5-E24-E23-E12-E30_W0QQitemZ130131219145QQihZ003QQcategoryZ33699Q QrdZ1QQcmdZViewItem

can i get this to replace my stoke manual mirror...whats involved w/ wiring and is this missing it?

thanks ima buy tomorrow morn :)

Jan
07-07-2007, 07:55 AM
I changed to a self dimming mirror in my 540iT without any problems, the wiring is not in the mirror, but in the wiring harness of the car. I used a mirror from another E34, so if the 750 mirror has the same plug, I canīt see why it should not work.

BFEINZIMER
07-07-2007, 11:02 AM
well ur T is a 95 and ima a 90 so i dont think i have the harness prewired...

Jehu
07-07-2007, 12:30 PM
How doe sit work? What dims? Is it lit and the bulb dims or is it in the glass?

attack eagle
07-07-2007, 03:44 PM
I just went to an e46 mirror, with no "gain" controls, and a built in alarm led.
best $3.25 I ever spent modding my car. :D

you should look up in the roof (after removing the sunroof switch plate of course). the plug on a sedan may be white 3 wire, on my touring it was yellow 3 wire.

94+ used the now standard 10 pin connector, since this is from a 93 it should be plug and play also on pre 93.

If not... you really only need ignition and ground. Mine also had the reverse wire to disable the autodimming when reversing, so I used it. Reverse was in the middle as i recall.


good threads on bf.c


http://forums.bimmerforums.com/forum/showthread.php?t=748951&highlight=mirror


http://forums.bimmerforums.com/forum/showthread.php?p=9778365&highlight=mirror#post9778365

I think I even re-listed color codes for those without the plugs who were willing to hard wire... or who needed to puzzle out which was which.

BFEINZIMER
07-07-2007, 05:51 PM
i checked above my sunroof panel and driver vanity light and could not find ANY extra plugs

attack eagle
07-07-2007, 06:15 PM
maybe 90's don't have it. it was hard to find in mine though, had to pull harnesses to make sure they were actually connected to something.