PDA

View Full Version : need screw dimensions please


steve0suprem0
05-16-2007, 04:17 PM
apologies for gigantic pic. still new to this digital photography thing.

http://img.photobucket.com/albums/v358/steve0suprem0/DSC00075.jpg

i searched for this on realoem, came up empty. so i'll give you my lame-ass description: right behind the grill, in front of the fan for the condenser (or evaperator, i always get the two mixed up, pretty sure it's the condenser tho.) there's this ...coil thing. looks like a squared figure-eight on its side. this is fastened to the top with a screw or bolt, which i have lost. you can see where the head would go next to the green label, with a shoddily drawn red circle.

all help is greatly appreciated, and thanks in advance.
attack eagle
05-16-2007, 05:56 PM
no idea, mine's missing too, and has been for a long time.
gale
05-16-2007, 06:15 PM
It's an M6 x 10 mm long.
steve0suprem0
05-16-2007, 09:30 PM
gale, you made my day. and i bet attack eagle's day too. that is if his...whatever that thing is... rattles all over his fan with the a/c on like mine does...

woo hoo! now i can use my a/c in places other than the freeway!
attack eagle
05-16-2007, 09:41 PM
actually no rattles... I don't think I have whatever was being retained by that (ps cooler maybe?), possibly because mine is an SLS car.
steve0suprem0
05-17-2007, 04:50 PM
huh. weird. nothing in front of your condenser fan?

btw, it's m6, but 10mm is a little long. doesn't interfere with anything, but 5mm will work no prob.
bmwrp8
05-18-2007, 01:05 AM
huh. weird. nothing in front of your condenser fan?

btw, it's m6, but 10mm is a little long. doesn't interfere with anything, but 5mm will work no prob.

mine also nothing there but all is fine:D