PDA

View Full Version : Starter help please!! 1990 525ia m20



wyze
04-04-2007, 10:05 AM
alright so i picked up another starter, scrap said it's for a 90 525ia

but again i don't seem to have a connector for 30h

can someone please take a pick if you have an automatic 1990 525i m20, i need to see how the wiring is, and i'm pretty sure that a main wire has been cut (from alternator to starter), all i have is a 4 guage wire going directly to the battery (battery is in engine bay), a yellow/black wire and green/black wire


pics please!!


thanks!!

632 Regal
04-04-2007, 01:01 PM
bump


thanks!![/quote]

E34-520iSE
04-04-2007, 04:16 PM
Yellow/black and green/black can both be connected together at the solenoid connector (the smaller one of the two you can see). That's how mine is. It works perfectly.

HTH,

Shaun M

wyze
04-04-2007, 10:58 PM
Hey thanks!!, hopefully that'll work, i'll be installing the starter tommorow then


just one more question, is there 1 or 2 wires coming off of the the main terminal(battery / alternator, or just battery)


thanks:D :D

wyze
04-06-2007, 07:44 PM
bump!!

E34-520iSE
04-07-2007, 03:36 AM
Do you mean the big terminal on the alternator? IIRC there's the big cable that comes from the battery, and a little flexible tail from the starter solenoid that also goes there. Push both leads on the bolt, tighten the locknut over the top and she's good to go!

HTH,

Shaun M

wyze
04-07-2007, 03:38 PM
yeah that's what i thought, the po had cut the alternator wire


alright now only if it were to stop snowing i could work on my car, sigh

thanks for all your help!!