PDA

View Full Version : E34 battery move (engine to rear seat)



ktteoh
03-13-2007, 06:41 PM
olks, my car is a 520i 24v manual. the battery is in the engine bay.

i would like to move it to be under the rear seats - cooler etc.

do you know if bmw has pre-wired it so that i can make the move without changing the wiring harness or routing a long power cable etc??

if anyone has any experience here to help me, i look fwd to your advice.

Ferret
03-14-2007, 07:29 AM
There's a main bus clamp position under the rear seat, you should be able to undo your batteries + lead from its clamp position under the bonnet/hood and transplant it under the rear seats.

Ferret
03-14-2007, 07:40 AM
On second thoughts, you'll also need the battery tray out of an under seat installed vehicle, and dont forget the vent tubes.

vadim_braia
03-14-2007, 01:45 PM
On second thoughts, you'll also need the battery tray out of an under seat installed vehicle, and dont forget the vent tubes.
i made this operation :d you will need the batery cable( from a BMW that have the battery behind the rear seats ) and aprox 3 hours
The procedure is easy .... all you need is to put the cable behind the carpet and behind the heating sistem , and to connect him to the electric motor and the accessory s cables :D

E34-520iSE
03-14-2007, 04:13 PM
i made this operation :d you will need the batery cable( from a BMW that have the battery behind the rear seats ) and aprox 3 hours
The procedure is easy .... all you need is to put the cable behind the carpet and behind the heating sistem , and to connect him to the electric motor and the accessory s cables :D
Just to satisfy my curiosity - which route does the new 'heavy' B+ cable take to get to the starter? Does it stay under the carpet and out through the bulkhead somewhere? Any chance of a pic?

Cheers,

Shaun M

ktteoh
03-14-2007, 06:08 PM
some questions:

1. if i used maintenance-free batteries, do i still need the vent tubes?

2. what cables do i need to source for? i guess from an electrical perspective, i need two one for +ve and another for the -ve ground. is there anyway i can salvage the existing cable used in the current (engine bay) position?

3. if no for (2), what is the part number for the correct cables and could i replace that with just any heavy duty electrical cable (what gauge would that be anyway)




On second thoughts, you'll also need the battery tray out of an under seat installed vehicle, and dont forget the vent tubes.

vadim_braia
03-15-2007, 01:28 AM
Just to satisfy my curiosity - which route does the new 'heavy' B+ cable take to get to the starter? Does it stay under the carpet and out through the bulkhead somewhere? Any chance of a pic?

Cheers,

Shaun M
some pictures....

vadim_braia
03-15-2007, 01:41 AM
some questions:

1. if i used maintenance-free batteries, do i still need the vent tubes?

2. what cables do i need to source for? i guess from an electrical perspective, i need two one for +ve and another for the -ve ground. is there anyway i can salvage the existing cable used in the current (engine bay) position?

3. if no for (2), what is the part number for the correct cables and could i replace that with just any heavy duty electrical cable (what gauge would that be anyway)
You can't save the old + cable , because it's to short and to thin :(

you will need the + cable ( a BMW original cable ) , you can use the old - cable(ground) :D . I connect the - cable to the right seat screw( the left one)
the cable part number : http://www.realoem.com/bmw/showparts.do?model=HD51&mospid=47375&btnr=12_0314&hg=12&fg=29

Ferret
03-15-2007, 02:27 AM
Hurr,

That's interesting I wonder if it's year dependant whether the +B cable runs into the rear seats?

My '91 525i had the main bus (IE starter motor capable) cable run straight under the rear seats with a mounting point for the battery lead...

Snap us a photo of under your rear seats and lets have a look see if yours has the point.

I'd have guessed that your original battery cable from under the bonnet/hood would bolt to this mounting point... but vadim_braia seems to have experience otherwise.

Also : Categorically YES you have to use a vent tube on any battery under the rear seat... unless you want explosive hydrogen inside your car. (The chances of an actual explosion are small, but not unheard of.)