Need help for minor Rear bumper fix

[Dukes]

This rear bumper has been annoying since I got the car and now I want to fix it. I pulled it out a little to exaggerate the image a bit.

When I push it in to be flush it will not go in all the way and just sits partially out.

Does anyone know what I can do?

Thanks


http://i70.photobucket.com/albums/i94/dodgeit_photos/img014.jpg

[brosher]

Remove the reflector, then remove the trim piece. There are several pieces which both hold the bumper in position and allow you to adjust it in and out. Pull out #10 and the o-ring. Then you can turn #8 (there are two notches in it) using some needle nose pliers. When the bumper is lined up the way you want pop #10 back in and turn to lock in place.

Parts 8,9 & 10 in this diagram from realoem:

http://www.realoem.com/bmw/diagrams/v/c/2.png

[brosher]

Also, if #6 or 7 appear broken you will need to pull the whole bumper cover off and replace them. I might even have some extra parts from when my bumper was replaced so let me know if you need something.

[Dukes]

Also, if #6 or 7 appear broken you will need to pull the whole bumper cover off and replace them. I might even have some extra parts from when my bumper was replaced so let me know if you need something.


Thanks brosher. I will look right into this soon.

I appreciate your help.