PDA

View Full Version : tranny question winfred superior part# k002



clarkstreet
01-10-2007, 03:24 PM
ready to replace the A clutch pack in my 4hp22 and bought just the plates and the replacement seals (superior # k002)cost for all was $55.00.In the directions with the seals it says replace 1 teflon seal not 2.replace seal on the rear of the shaft.Kit comes with 3 seals to do 3 transmissions.If you could check out http://www.superior-transmission.com/products/problem_solvers/k002_cnts.htm .Has anbody tried theese seals?

winfred
01-10-2007, 04:46 PM
they take two of those seals on the input shaft

Blitzkrieg Bob
01-10-2007, 04:55 PM
http://www.superior-transmission.com/products/problem_solvers/k002_cnts.htm

I wonder what that TV spring will do for my old 4hp22?

clarkstreet
01-10-2007, 05:26 PM
according to the manufacturer just 1.I talked to tech service and they said just the rear.I'm going listen to the guy who's done them and use 2.But even on the package its said for 3 trannys.

clarkstreet
01-10-2007, 05:58 PM
they sell to distrbution co. not to the public.I get my kits from transtar which has 35 locations in the U.S. They sell ind. clutch plates (brand name)and superior products(problem solvers)no need to buy a $200 kit for just the A clucth pack