PDA

View Full Version : UNUSED & ORIGINAL BMW 5 speed Manual Transmission



shogun
12-06-2006, 10:47 PM
Kenneth Woo in Malaysia is offering it
http://cgi.ebay.com/ebaymotors/BMW-E24-E28-E30-E34-E36-Getrag-260-5-spd-Manual-Trans_W0QQitemZ140058511139QQihZ004QQcategoryZ3373 3QQrdZ1QQcmdZViewItem

or how about this?

BRAND NEW & ORIGINAL BMW 3.2Litre Stroker Kit. Kit includes 1 crankshaft (with bearings shells), 6 pistons (with rings set), 6 conrods (with bearings shells), 1 head gasket & camshafts. All these parts are BRAND NEW and ORIGINAL BMW. Your displacement will be increased to 3.2 Litres or 3,152cc to be exact.
http://i88.photobucket.com/albums/k171/whk79/eBay/strokercopy.jpg

http://cgi.ebay.com/ebaymotors/Brand-New-Original-BMW-E34-E36-E39-3-2L-Stroker-Kit_W0QQcmdZViewItemQQcategoryZ33623QQihZ004QQitem Z140029958584

He always has many goods things on his list
http://stores.ebay.com/Great-BMW-Deals_W0QQcolZ4QQdirZ1QQfsubZ0QQftidZ2QQtZkm

Rigmaster
12-06-2006, 10:51 PM
I bought some parts from him before- he's a good seller.

I believe he's the guy who sells the E34 outer door handle seals too.

He seems to be helping the Malaysian BMW dealer network clear out odd/slow moving parts. I wonder who gets these parts from BMW dealers in the US or what they do with them???? :)

Bret.

shogun
12-06-2006, 11:04 PM
Yep, that is the guy who is selling the outer door handle gaskets too.
Good seller, as you say. I buy a lot from him.
Never had trouble.

I think that is a clever way to help out the dealers to clear old / slow moving stock. They for sure have so many parts which they ordered by mistake and have it on stock for a long time.
I know it from our parts department how many wrong ordered parts are on stock for a long time. We write them off and then we offer them to our other subsidiaries at very low prices.
Working capital reduction is a magic word nowadays by the controlling departments.

Kalevera
12-06-2006, 11:20 PM
Erich...I've seen the listing for that trans before (as well as the M30 G260/6 that he had listed for the same amount of money)...and...I have to say...it looks pretty used by my eyes. For the money and the assertions, the thing should be spotless.

acidfire52
12-07-2006, 02:40 PM
Would love to have that stroker kit.. mmmmm stroker.. :p

Little pricy for me though...

Zeppa
12-07-2006, 03:54 PM
did look a bit used didnt it :)

Ross
12-07-2006, 05:11 PM
$7500 ought to buy more than 700 CCs. Cool item but who needs it for that amount of dough?
****, 20k bought a whole E34 with a 6 liter V-12!

hakwuzhere
12-08-2006, 01:26 AM
What kinda HP gains can be expected from a 3.2L upgrade on a M50nonTU?.... is that kit compatible?... Im trying to stay NA just because I dont have the local know how to get me boosted.

Jon K
12-08-2006, 02:27 AM
What kinda HP gains can be expected from a 3.2L upgrade on a M50nonTU?.... is that kit compatible?... Im trying to stay NA just because I dont have the local know how to get me boosted.

You have to take the non vanos from 84mm out to like 86.7 or whatever the S52 bore is. Then you have to fit the S52 rods and crank. You might as well just start out with an S52 block.

mattyb
12-09-2006, 07:17 AM
maybe a bit more than a bit used i would say.

Elekta
12-09-2006, 07:33 AM
Does he have a US E34 M5 cat back exhaust system?

attack eagle
12-09-2006, 08:37 AM
nice, but way more than I would want to spend on a tranny. particulalrly one that has oily dirt in the numbers like it has been used before.