NitrousO
11-02-2006, 01:14 PM
Several questions
1. I love my 95 525i dearly but recently the armrest on the drivers sear has been bugging me. It has several large cracks running through it and I was wondering if there was any way to fix it (interior is pergament, parchement color).
http://img160.imageshack.us/img160/3976/img0020nl7.jpg
Any ideas as to how I could fix it?
2. There are a few broken pieces of plastic in my car but I am unable to glue them back together with any glue/epoxy I have tried so far (no glue/epoxy can disolve the plastic or even stick to it!). Anything that COULD be used to glue these parts back together? Or could I use a soldering iron to heat up the parts and melt them back into one piece?
3. The front passenger seatbelt is no longer pulling as hard as it should and allows a large amount of the seatbelt to hang out without being retracted. The big problem Im having is, how do I remove the seatbelt assemblys cover so I can get to the retraction mechanism?
4. The trunk seems to no longer have its power assist as in, the trunk is no longer aiding me in keeping it open. Its a horrible balancing act now that usually ends with the trunk trying to bean on the noggin as I get stuff out of it. Any idea how to fix it?
5. The warning about the break light circuit keeps coming on intermitently despite the fact that all 3 brake lights are functioning. I brought it in to a local repair shop where they replaced one of the lights that looked burnt but the warnings continue to come on.
6. The window washer fluid low warnings intermitently come on in my car despite the fact that the resevoir is completely full and the sensor is plugged in. Any ideas?
If you could answer any of these problems I would be very grateful. I love the car so much I cant stand to think of these things going unrepaired and being in college I dont have any money to have the stealer do it for me (besides I learn how it works when I repair it myself :) )
1. I love my 95 525i dearly but recently the armrest on the drivers sear has been bugging me. It has several large cracks running through it and I was wondering if there was any way to fix it (interior is pergament, parchement color).
http://img160.imageshack.us/img160/3976/img0020nl7.jpg
Any ideas as to how I could fix it?
2. There are a few broken pieces of plastic in my car but I am unable to glue them back together with any glue/epoxy I have tried so far (no glue/epoxy can disolve the plastic or even stick to it!). Anything that COULD be used to glue these parts back together? Or could I use a soldering iron to heat up the parts and melt them back into one piece?
3. The front passenger seatbelt is no longer pulling as hard as it should and allows a large amount of the seatbelt to hang out without being retracted. The big problem Im having is, how do I remove the seatbelt assemblys cover so I can get to the retraction mechanism?
4. The trunk seems to no longer have its power assist as in, the trunk is no longer aiding me in keeping it open. Its a horrible balancing act now that usually ends with the trunk trying to bean on the noggin as I get stuff out of it. Any idea how to fix it?
5. The warning about the break light circuit keeps coming on intermitently despite the fact that all 3 brake lights are functioning. I brought it in to a local repair shop where they replaced one of the lights that looked burnt but the warnings continue to come on.
6. The window washer fluid low warnings intermitently come on in my car despite the fact that the resevoir is completely full and the sensor is plugged in. Any ideas?
If you could answer any of these problems I would be very grateful. I love the car so much I cant stand to think of these things going unrepaired and being in college I dont have any money to have the stealer do it for me (besides I learn how it works when I repair it myself :) )