'95 530i parting out

[Rigmaster]

I've got a '95 530i that I'm parting out. Here are a couple of pics. As you can see, it was hit pretty hard in the left front. The interior is Pergament/Parchment and most of the upholstery is in good shape, but the front seat frames appear to be bent.

Side skirts are not available- I'm putting them on my 525iT.


Please email or PM for specific requests.

Thanks!

Bret.


ps- car is located near Raleigh NC, I will ship anything that can be shipped at buyer's expense.




http://img.photobucket.com/albums/v11/rigmaster/IMG_1000.jpg
http://img.photobucket.com/albums/v11/rigmaster/IMG_1001.jpg
http://img.photobucket.com/albums/v11/rigmaster/IMG_1002.jpg
http://img.photobucket.com/albums/v11/rigmaster/IMG_1004.jpg

[RobPatt]

don't really care about the color or airbag... just something that's not warping all over the place like mine is.... really starting to drive me nuts... great car, great shape.... 'cept for this dang warping...

and my headliner falling, which I'll do soon....

but serious about the dash... dark grey is ideal if in good shape.

thx, Rob sends.....

[632 Regal]

Why dont you just fix it?

;)

[Traian]

Fog lights still okay?

[632 Regal]

look like it to me.
Fog lights still okay?

[E34 530]

I need the 4 little "brackets" that support the acoustic engine cover.

[Boone.Msi]

Did the DME make it? if so how much? thanks

[angrypancake]

i know that Vinny here on the board (Booster) wants all the wood trim bits. we've got a top secret plan for 'em.

[Milkboot]

Fuel pump good and ok? hehe, I ran into some problems with mine and i belive it may be the cause of my problems all together. any chance the little computer in the dash is good too?


OH! ;) i need relays!

[CharlesAFerg]

holy ****, that looks fatal.

Telephone pole?

Regardless, PM me about the:
-rear passenger female seatbelt adapter

-the rear bmw trunk emblem

-rear driver inner-most triangle window rubber trim(ask if you didn't understand that one lol)

-and also the door handles with the rubber seals if you could, but the rubber door handle seals would be fine if you can't get the door handles.

-any remaining black plastic bumper trim that's intact such as the rear and as much of the sides that are still intact.

-Rear drivers side chrome exterior window trim

-Any interior chrome trim that is intact

[632 Regal]

driver side and pass side are specific, cant switch em

-rear passenger female seatbelt adapter

[CharlesAFerg]

driver side and pass side are specific, cant switch em

So what do I need, because it won't lock in. :D

[Michael999]

Im interested in:

-dashboard top vent as long as its not warping at all.
-rear seatbelt plug in things (the button and latch assembly)

Pm me back or leave a messsage in the thread, cheers

[pgrindstaff]

I am interested in the two top plastic pieces that go around the seatbelt in the back and the four door sills if they are in good shape. Please let me know.

-patrick

[Russell]

Did you get the e-mail I sent you on the door sills and rear parcel shelf? Sent it last evening

Thanks,

[RobPatt]

will search the archives....just don't recall ever seeing someone fix their warped dash... you've given me hope!


Why dont you just fix it?

;)

[KurtM]

that attaches to the seat frame including wiring. Also the driverside seat bottom leather if in good condition with no cracks in leather.

Thanks,
Kurt
95 525ia

[632 Regal]

you need a new seatbelt recepticle. I mean that the left and right arent interchangeable not that you cant replace them. looks like a high demand part too.

So what do I need, because it won't lock in. :D

[E34 530]

And also the spare tire retaining disk if it has one.

[Vanguard]

I'd be interested in the cover for the positive battery terminal cover in the engine compartment. (covers the jump start terminal).

[Rigmaster]

Thanks for the replies guys- I've replied to some of you, and I'm working on checking parts and replying to the rest of you.

If I don't get back to you for some reason, please feel free to send me a reminder.



Thanks!
Bret.

[BFEINZIMER]

the little ribbed tab witht he hole in the gearshifter:

http://www.realoem.com/bmw/showparts.do?model=HD23&mospid=47408&btnr=51_2232&hg=51&fg=35&hl=551 (#11)

Part Number Description
51 16 1 938 352 Shifter Sliding Cover - Auto Transmission

[CharlesAFerg]

Im interested in:

-dashboard top vent as long as its not warping at all.
-rear seatbelt plug in things (the button and latch assembly)

Pm me back or leave a messsage in the thread, cheers

Already claimed the rear passenger seatbelt plug and receptacle.

[Rigmaster]

the little ribbed tab witht he hole in the gearshifter:

http://www.realoem.com/bmw/showparts.do?model=HD23&mospid=47408&btnr=51_2232&hg=51&fg=35&hl=551 (#11)

Part Number Description
51 16 1 938 352 Shifter Sliding Cover - Auto Transmission


No offense, but you're better off just buying that part new- should be less than $10 from BMA.



Bret.

[Rigmaster]

don't really care about the color or airbag... just something that's not warping all over the place like mine is.... really starting to drive me nuts... great car, great shape.... 'cept for this dang warping...

and my headliner falling, which I'll do soon....

but serious about the dash... dark grey is ideal if in good shape.

thx, Rob sends.....


Rob,

the dash in this car is tan. I'm not sure it's possible to get it out without damaging it, or if it's already damaged- the car took a pretty good shot in front and both airbags blew.

Thanks,
Bret.

[94530inh]

I need the rear door pannels and the outside moldings on the bumpers doors, you know the black ones, along with the reflectors. Also i'm interrested in the door gaskets for all four doors.

Thanks

Questions/comments

E-Mail: Denon8aa@erau.edu

[Rigmaster]

Fog lights still okay?



ahh, no.

did you see the pic of the front of the car?



Bret.

[Rigmaster]

I need the 4 little "brackets" that support the acoustic engine cover.


#3,4,5,6 from this diagram(?)- http://www.realoem.com/bmw/showparts.do?model=HE23&mospid=47406&btnr=11_1249&hg=11&fg=55


If so, I've got them- they might be a little tweaked from the wreck, but they should be perfectly useable.


$30 shipped for all 4.


Thanks, Bret

[BFEINZIMER]

ooo you would also be a life saver if i coul get these: (i need 3 of them, the little plastic covers)

oh and if that other dude doesent want it or sumthin ;) can i get the cap for the + positive battery connection where you put your + jumper cable..mines missing

http://i45.photobucket.com/albums/f62/BFEINZIMER/cap.jpg
http://i45.photobucket.com/albums/f62/BFEINZIMER/bare.jpg

[Rigmaster]

ooo you would also be a life saver if i coul get these: (i need 3 of them, the little plastic covers)

oh and if that other dude doesent want it or sumthin ;) can i get the cap for the + positive battery connection where you put your + jumper cable..mines missing

]


http://www.realoem.com/bmw/showparts.do?model=HE23&mospid=47406&btnr=41_0740&hg=41&fg=45

See #15 in this diagram. They show the price of 0.33 cents each- might want to just add these to your order from BMA for the shifter thing.

I'd be glad to sell them to you, but I'd like to keep them with the door panels.

Thanks!

Bret.

[94530inh]

i'd really like both rear door pannels

[BFEINZIMER]

http://www.realoem.com/bmw/showparts.do?model=HE23&mospid=47406&btnr=41_0740&hg=41&fg=45

See #15 in this diagram. They show the price of 0.33 cents each- might want to just add these to your order from BMA for the shifter thing.

I'd be glad to sell them to you, but I'd like to keep them with the door panels.

Thanks!

Bret.


I'll be glad to buy em off you haha, for 3 of them, plus the shifter, and the battrey cap, how much? Oh, throw in the glove box flashlight, the right hand map light bulb, and the OBC, and the AC center duct (64221384041) http://www.realoem.com/bmw/showparts.do?model=HD23&mospid=47408&btnr=64_0142&hg=64&fg=05 please while your at it lol...total please?

[Montreal525]

How about the climate control module? Or as Bentley puts it, the Integrated Climate Regulation Control Module... the infamous IHKR/F3... Mine works when it wants too...

And also, the passenger side front fender and front door protective mouldings...

Jeff

[eem2x]

Couple of items:
1. Sound Absorber above intake manifold. Item 18 http://realoem.com/bmw/showparts.do?model=HE23&mospid=47406&btnr=11_1498&hg=11&fg=40&hl=12

2. Right rear passenger door panel. Item 1
http://realoem.com/bmw/showparts.do?model=HE23&mospid=47406&btnr=51_3065&hg=51&fg=50&hl=65

3. Rear door weather strip for left and right doors, Item 2
http://realoem.com/bmw/showparts.do?model=HE23&mospid=47406&btnr=41_0737&hg=41&fg=45&hl=90

4. Trunk: the piece of sound insulation (trim) which is grey and fits up against the rear seat. It is ~ 2.5 feet high and the width of the trunk. It is one of the 3 sound trim pieces in the trunk.

5. Window motors (all that survived).

Feel free to email me. Thanks!

[Ariel525i]

Hi ringmaster,

Just wondering, are your side mirrors still ok? I plan to use them on my '89 525i, would need to know if they got the memory fuction or if they are the regular power side mirrors with no extra functions. I'll be needing the basic mirrors (no extra functions).

If they are what I need, how much for the pair?

I live in the Philippines and would need shipping via
DHL.

Thanks.

Ariel

[632 Regal]

Hey Bret do you have the nut behind the wheel? I would like to talk to him.

[Johntee540]

Rig - I need the pins that hold the Seatbelt adjustment cable to the Seat Frame. Do you have those? I would kill for those! - JT

[E34 530]

and the blower resistor lol.

[Rigmaster]

If you're waiting on a reply from me- it's probably due to a couple of different things- here are some of the common reasons for delay:

1- I need to check on the condition of the part(s) before I tell you that I have them and just have not had time.

2- I would prefer to sell the item(s) you asked for as part of a set or a complete assembly (front seat armrests or individual door panels for example)

3- I don't know what a fair price would be for the item(s).


Soooo, if you are still waiting for a reply- email (preferred as my PM box is about full) or PM me with a list of parts you want along with an offer- this may speed up the process as it makes my part of the transaction much easier. I'll continue to send replies as I can- regardless of whether or not you send an offer.



Thanks!!

Bret.

[BFEINZIMER]

I have emailed you...let me know if you don't recieve it (BFEINZIMER [at] gmail.com)

[BFEINZIMER]

can i hear a BUMP

[Rigmaster]

I'll see your bump and raise you to another FS post... :)


I'm posting up some parts from this car and some other parts I'm clearing out in the FS section of the board.



Thanks, Bret.

[tazman]

bump

[BFEINZIMER]

wait...i sent an email and a PM, and whats this FS?

[Rigmaster]

check out FS/Swap meet forum for more pics and more items.

For those who have sent PM's or Emails, I've replied to most- and I'm working on the rest- checking part condition, etc.


Thanks!

Bret.

[bbig119]

Hey I'm interested in the "pitch sensor"/"inclination sensor" located in the trunk in front of the factory amp.

Also, I know someone already requested, but I'm interested in the rear door panels.

[gjmane36]

I am interested in two of the rims. Are any still true?

[Rigmaster]

I am interested in two of the rims. Are any still true?


Yes, as a matter of fact, I just put 3 of them on my wife's 535i. The wheels that came off of her car are in good shape, but the tires are worn out.

I'll PM you with more info.

Thanks!

Bret.

[632 Regal]

I'd like the hood if you can have it painted Kashmerebeigh

bump

JK

[sfgearhead]

Hi Bret,

I need a set of owner's manuals plus the folder for a 1995 5 series. I'll offer $30 plus shipping if you still have them.

Thanks,
Ian