View Full Version : e30 m3 short shift on e34?
L11_XTC
09-28-2006, 05:54 PM
hi im wanting to upgrade my shifter on my 1994 525 24v to a short shift, does anyone know if the e30 m3 short shift will fit straight onto my car or of any good alternatives, i am in the uk, thanks
craigmo
09-28-2006, 06:24 PM
hi im wanting to upgrade my shifter on my 1994 525 24v to a short shift, does anyone know if the e30 m3 short shift will fit straight onto my car or of any good alternatives, i am in the uk, thanks
I'm not sure about the E30 M3 shifter, but I am using a shifter from a Z3 and it works great.
I'm using the Euro e36 M3 shifter & it works great. Here's an assortment of various shifters:
http://www.nmia.com/~dgnrg/shift_comp.gif
The missing part number is 25 11 1 222 955
You can do a part number search on www.realoem.com to find what models the various part numbers were used on.
shanek
09-29-2006, 12:23 AM
I'm using a Z8 shifter. Any BMW shifter will work as long as it has the bend in it. BMA sells a complete kit, I'm not sure what shifter they used though.
http://www.bmaparts.com/epcgetspecials.epc?cookieID=1WQ03H1HV1WQ03H71H&drillid=5&level3=E30%2FE32%2FE34%2FE36%2FE24&clientid=bmaparts
Espen
09-29-2006, 01:28 AM
http://filserver.pyrabel.net/bilder/e34/skjemaer/shift_comp.gif
The Z3 would give you a shortest shift, but it doesnt have the bend.
The E36 series would give the shortes shift movement, of those with the bend.
Kobe Diesel
09-29-2006, 12:57 PM
I have the E36 M3 shifter
I like it very much!
Purchased from BMA. The kit did not have everything I needed for a shift linkage overhaul, so I purchased the remaining items from a local dealer.
Didn't bend anything b/c everything cleared the guibo and shaft, but always double check to make sure nothing touches.
Jay 535i
09-29-2006, 01:12 PM
I'm using a Z8 shifter.
Ditto, and it's great.
Plus I have the added esoteric satisfaction of knowing that one small, hidden part of my car came off a $200,000 Bondmobile ;)
E34-520iSE
09-29-2006, 01:49 PM
I'm using a modified E30 short shift in my car. I cut it right down in height for comfort. The difference was unbelievable! It's been on 2 years and I can't imagine life without it - it's even shorter than the Z3 one. It's the same height as the one on the new Astra's. Just a little stubby thing poking up - so comfortable! I give it 12/10! I can post a pic tomorrow if u are interested!
Cheers,
Shaun
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.