Can someone measure stock muffler?

[Jon K]

I am trying to fit this:

http://store.summitracing.com/partdetail.asp?autofilter=1&part=WLK%2D24219&N=700+4294922710+400358+4294891681+4294791977+115&autoview=sku

in where the stock muffler goes. That one is 23.5" long with ends. They make one with 16" total length but I doubt it muffles as well. Can someone measure a stock muffler? I don't have one here at school.

[angrypancake]

is the 535 dif than the 525?

[genphreak]

is the 535 dif than the 525?It fits in the same place, but the 535 is either longer or just different inside. I expect the latter. :) Nick

[saj3n]

ay Jon, let me know how you make out with this... might swap mine out as well... if you want to do the work with me one weekend.

[fkong777]

getting a race bullet? it will not muffle much at all.

[Jon K]

I just need something and i need the exhaust to come out the back of the car lol

[rob101]

I am trying to fit this:

http://store.summitracing.com/partdetail.asp?autofilter=1&part=WLK%2D24219&N=700+4294922710+400358+4294891681+4294791977+115&autoview=sku

in where the stock muffler goes. That one is 23.5" long with ends. They make one with 16" total length but I doubt it muffles as well. Can someone measure a stock muffler? I don't have one here at school.
i can i have an OEM replacement muffler sitting in the floor of my house. But you will not measurements in inches so if mm is okay. then i will post up the measurements. you just want the rear muff right?

[Jon K]

yeah the rear most section mm is fine

[McWatters]

Thats awsome man 3nich, from my cars double cat. im hooking up 2^3/4 dual straight pipes out the side behind the drivers rear wheel, its goin to look beauty with chrome angle cut tips. so far just have from the pre muffler back, as i have an etest to past soon.

cheers.

[Alexlind123]

Thats awsome man 3nich, from my cars double cat. im hooking up 2^3/4 dual straight pipes out the side behind the drivers rear wheel, its goin to look beauty with chrome angle cut tips. so far just have from the pre muffler back, as i have an etest to past soon.

cheers.

But what about the notch in the bumper?

[McWatters]

Ah of course , well my buddy happens to have some fiberglass skills and everything i need.

I havnt decided tho if i want to put holes for the exhaust to come through on the side, or just have a nautch on side.

cheers

J.McWatters