PDA

View Full Version : No error, fog lights not on, high-beams no worky?



Guelphguy
07-20-2006, 06:59 AM
Ok, crappy few weeks....travelling down the highway at 100+kmh, changing lanes to behind a transport, only not to see that he was passing over a fresh exploded truck re-tread that nicely banged, clunked and dragged under my whole car...anyway did not think there was any damage at the time, all looked well. Then two days ago, a bird flew into the front of the car, did not think anything of it.
Now I just noticed yesterday as the GF was pulling out of the driveway that one fog light was hanging out so I just popped it back in. Then noticed the fog lights are not on...flicked switch...nothing, also then notice that the highbeams will not stay on...you can flash them on, but "turning" them on, push lever forward they will not stay on...
Any ideas??

sbihue
07-20-2006, 07:03 AM
Ok, crappy few weeks....travelling down the highway at 100+kmh, changing lanes to behind a transport, only not to see that he was passing over a fresh exploded truck re-tread that nicely banged, clunked and dragged under my whole car...anyway did not think there was any damage at the time, all looked well. Then two days ago, a bird flew into the front of the car, did not think anything of it.
Now I just noticed yesterday as the GF was pulling out of the driveway that one fog light was hanging out so I just popped it back in. Then noticed the fog lights are not on...flicked switch...nothing, also then notice that the highbeams will not stay on...you can flash them on, but "turning" them on, push lever forward they will not stay on...
Any ideas??

Looks like a DEAD LKM

Check bmwe34.net It has some pointers about how to fix it

Guelphguy
07-21-2006, 10:04 AM
Since I can get the highbeams to come on? No problems with low beams at all? Would that still be LKM?

Qube
07-21-2006, 10:06 AM
If your high beams don't work, neither will your fogs. You DID check the high beam circuit for power at the plug right?

Guelphguy
07-22-2006, 11:07 AM
There is power to the highbeams, the highbeams will come on if I just pull the lever forward (flash mode) but won't stay on in the stay-on push lever mode...if that made any sense. Almost like the signal switch/arm is toast but why would that effect the fog lights?

piman
07-22-2006, 11:18 AM
There are seperate relays in the LKM. Both the HB and FG lights at the same time? Not likely. Check fuses and any conection/ wiring arount the front where it could have been hit with debris. Sorry cant help much.

Tiger
07-22-2006, 11:39 AM
High beam shuts off fog light.

Paul in NZ
07-23-2006, 02:56 AM
lkm ussually seem to fail the high beams most often,that how mine worked.