MegaSquirt success :)

[Jon K]

Car is idling outside on fuel and spark control via MegaSquirt ecu Video to come later - need to go celebrate!



However, I need to know where to find the wire that goes from the alternator to the battery light in the gauge cluster on a 9/91 build 525i

[saj3n]

Car is idling outside on fuel and spark control via MegaSquirt ecu Video to come later - need to go celebrate!



However, I need to know where to find the wire that goes from the alternator to the battery light in the gauge cluster on a 9/91 build 525i

CONGRATS!

[HDhandyman]

TADOAW!

Nice. I feel like I've been reading about this mod for a long time. I'm sure that it felt much longer for you. I'm really excited that you pulled this one off. That's fantastic!

[Jon K]

Yeah - my struggle was with the crank wheel and the ignition system. I noticed that the M20 wheel and the M50 non vanos wheel are the same relative to the CPS... so I just plugged int he M20 #'s and set my cranking advance to 5 degrees and idle about 7 degrees and she's running.

[Evan]

where can i read about what ms does?

[Jon K]

www.megasquirt.info

or more specifically for BMW application:

http://megasquirt.sourceforge.net/extra/

[Alexlind123]

COngratulations.

[BigKriss]

Whoo hoo!

[bjl4776]

Congrats man, you just inspired me again. Now all you need to do is to try and switch it over to COP. And all i need to do is stop being lazy and cheap. Im going to have to get all of your numbers, i know your crank wheel is different than mine, but i already knocked the key through so i can put it on any angle i want.

[Jon K]

If you can spin it then I would I set it like mine that way we're all the same.