PDA

View Full Version : Adjusting hood height?



Jon K
04-28-2006, 03:05 PM
I am a perfectionist and I feel that my hood sits about 1/16" too low toward the windshield. How do I raise that side up? I know the raises with a set of rubber stoppers.

Blitzkrieg Bob
04-28-2006, 03:15 PM
for the windshield side, the ramp like catches next the the electrical boxes. loosen the bolts and they side around.

Front, the latch catch rotates and the rubber snubs take up the slack

liquidtiger720
04-28-2006, 05:25 PM
Its in the bentley jon.

bahnstormer
04-28-2006, 05:53 PM
search u n3wb

Alexlind123
04-28-2006, 09:02 PM
What about moving the hood back and forth?

Jon K
04-28-2006, 09:07 PM
search u n3wb

like you've ever contributed anything. go ahead, search for aligning the hood... let me know how productive you are.

wingman
04-28-2006, 09:08 PM
What about moving the hood back and forth?

There's a little latch inside the cabin down under the dash. Pull it towards the rear and the hood will move forward. Pushing the hood from the front when outside the car will move it backward:D

Sorry I just couldn't resist!

liquidtiger720
04-28-2006, 09:29 PM
Jon-

Bentley Fenders, Engine Hood. Page 410-3

BigKriss
04-29-2006, 03:07 AM
I put two washer underneath the bolts to raise the height near the windscreen, maybe they are 2mm each, there's enough thread left on the bolt for it to stay in place.

bahnstormer
04-29-2006, 09:35 AM
like you've ever contributed anything. go ahead, search for aligning the hood... let me know how productive you are.


do a search on my posts, they're productive.

unlike your here's a picture of pt's car posts. wanker.