Prob with rear window weather stripping, pic inside

[Jon K]

http://e34.digital7.com/BMW%20Work/windowprob.jpg


I think in the heat the other day when rolling the window down (it hadnt been opened in about 3 weeks) it was kind of stuck to the glass or something and pulled it... now I have it sticking out a little bit and it looks horrible. It's not leaking because the window goes above it, but I need to fix it asap.

What do you people think?

[genphreak]

euww. Could only suggest contact adhesive once the surfaces inside are clean with alcohol and both pieces surfaces are tacky.

Otherwise, trim the offending piece and be done with it.

[Jeff N.]

Not 100% clear what the problem is..however I've had some similar problems with window seals. It seems that it's usually something is no longer connected/clipped/held right combined with sticky rubber.

Find out what's come unclippped and also work the rubber tracks with some silicon spray.

[Johntee540]

I just noticed I have the same problem! same issue it looks like the tinting stuck to it and it pulled out. Any help would be great! - JT

[632 Regal]

Razor blade, clean the track from sticky things as mentioned.